ECONOMIC AND ENVIRONMENTAL ASPECTS OF MODIFICATION OF ELASTOMERIC MATERIALS DURING OPERATION IN HOT CONDITIONS
Vol. 12 No. 1 (2022), Articles
Vol. 12 No. 1 (2022)

ECONOMIC AND ENVIRONMENTAL ASPECTS OF MODIFICATION OF ELASTOMERIC MATERIALS DURING OPERATION IN HOT CONDITIONS

Articles
Published 2022-10-15
  • D.R. Babakhanova
D.R. Babakhanova
PDF

Keywords

Elastomeric material, composition, raw materials, waste, antioxidant, stabilization, rubber compound

Abstract

In order to save imported multifunctional materials, local raw materials and waste products were used in this work – gossypol resin in place of dibutyl phthalate. The developed high-molecular antioxidant compares favorably with the low-molecular antioxidant neozone D in rubber mixtures. The usual antioxidant (imported) used for comparison (neozone D) is removed during extraction and migration, as a result of which the sample after aging turns out to be too fragile for testing. This in turn leads to a deterioration of the environmental situation.

PDF

References

1. Chuprova L.V. Ekologicheskie i ekonomicheskie aspekty utilizacii othodov stekla [Environmental and economic aspects of glass waste recycling] [Electronic resource] / L.V. Chuprova, O.A. Mishurina // Mezhdunarodnyj zhurnal prikladnyh i fundamental’nyh issledovanij [International journal of applied and fundamental research]. – 2016. – № 11-2 – P. 222–225. – URL: https://applied-research.ru/ru/article/view?id=10468 (accessed: 11.08.2019). [in Russian].

Baratov S.E. Vtorichnaya pererabotka stekla v Rossii: vzglyad iznutri [Glass recycling in Russia: an inside look] / S.E. Baratov // Nauka, tekhnika i obrazovanie [Science, technique and education]. – 2015. – № 3. – P. 33–35. [in Russian].

Shakhova V.N. Poluchenie oblicovochnoj keramiki s ispol’zovaniem nesortirovannogo boya tarnyh stekol [Receiving of ceramic veneer with the use of unsorted container glass breakage] / V.N. Shakhova, I.A. Vitkalova, A.S. Torlova and others // Ekologiya i promyshlennost’ Rossii [Ecology and Industry of Russia]. – 2019. – №2. – P. 36–41. [in Russian]

Dedov A.V., Chernousova N.V. Extraction of stabilizer from rigid and plasticized polyvinyl chloride. Plastic masses. 2020;(1-2):19-20. https://doi.org/10.35164/0554-2901-2020-1-2-19-20

Babakhanova M.G. Investigation of the features of the polymerization and copolymerization reaction of 2-thiobenztiazole methacrylate. Cand.diss. Tashkent 1984, 120 p.

Nafikova R.F., Fatkullin R.N., Afanasyev F.I., Stepanova L.B., Islamutdinova A.A. Investigation of the effect of DES M2 plasticizer on physical, mechanical and technological properties. Plastic masses. 2020;(3-4):33-36.